Vacron 16CH NVR Manuel d'utilisateur

16CH NVR User Manual 2013 AUG V1.0

6 Chapter 5 【Operation Options】  Operating with a Mouse and a Remote 1. Operating with a Mouse 1) Right click at Live View screen to open sy

7 Chapter 6 【Operation Setup】 1. Live View and Operation 1.1 Live view display after start up as diagram shown below. 1.2 Left and then righ

8 2.2 Open the EVENT page as figure shown below, click on the date you wish to view, the event log will appear on the right side of screen. 3

9 4. Setup 4.1 Right click on live view screen to bring up Quick Launch Bar. Click [SETUP] to bring up SETUP menu as shown below.  DISPLAY

10 be a spot monitor. 3) Click on [SAVE] to save and exit.  CAMERA  Setup 1) Choose the type of network camera. 2) Enable connection and

11 3) The parameters of selected cameras must setup correctly. It includes stream types: main and sub stream; bitrate types: VBR (variable bitrat

12 5) Select [ENABLE] to enable motion detection. Click [apply all channel] to apply identical parameters to all cameras. (Note: Motion detectio

13  Search 1) Enter SEARCH menu, click [START], the system will generate a list of cameras that are found and connected to the network. The n

14 7) Point the cursor and click the IP address under new IP that needs to be changed. On-screen keyboard will popup in the screen. Click again

15 9) Please allow the system apx. 20 seconds to connect the selected cameras. All channels that are connected successfully will show images, MA

Notice before use This authorization agreement of client’s software/hardware is legally effective to you(individual or single machine) and our compa

16 REC) and duration of alarm event. 3) Click [SELECT ALL IPCAM] to apply to all cameras. 4) Click [SAVE] to save and exit record setting.  S

17  EVENT  Event Notification 1) Click [ENABLE] to enable email notification of an event. Server mail, server port, from email, login name, l

18 3) Sensor device must install and connect to ALARM IN. The NVR supports up to 16 sensors. Click [ENABLE] and select NO (normal open) or NC (nor

19  MOTION 1) MOTION : click [MOTION] to get to MOTION page. Click on the cell to mark types of notification: email, SMS phone, and alarm 1 to 4

20  STORAGE 1) Click [RECYCLE] for continuous recording and overwrite the old data on storage device. Click [ONCE] to record once and stop reco

21  SYSTEM  INFORMATION 1) Current firmware and hardware versions. 2) MAC addresses and build date/time. 3) UBOOT and KERNAL versions and

22  NETWORK 1) Two Ethernet available: Ethernet 0 and 1. 2) Click ip address cell to get the on-screen keyboard. Change ip address if needed. C

23  PASSWORD 1) Click [ENABLE] to enable password setting. Administrator has highest authority of operation. Administrator can authorize USERs

24 5. Playback 5.1 Operations of Playback 1) Click to go back to 16 channel live viewing. 2) Click to go back to previous set of f

25 6) Use the playback control buttons as chart below after finding the specific time to view. : Play : Stop : Pause : Revere (max. 32X)

Terms and Conditions The overall risk, is that arising out of the use or performance of software and hardware products. This product will be informe

26 7. Display Mode 7.1 Click for 1, 4, 9, or 16 channel viewing

27 Chapter 7 【Advanced Features】 1. Quick Adjustment Viewing Channel Layout. 1.1 The viewing channels are displayed in the order of IP address

28 3 Quick Search for IP Address and Name Change 3.1 Click top-left corner of the camera. 3.2 The parameter of the camera will appear on screen.

29 5. Zoom-In on Single Channel Display 5.1 Double click a channel, the live viewing will change to single channel viewing. 5.2 The yellow arr

30 6. Firmware Upgrade 6.1 Save new firmware on a USB flash memory or on a PC. 6.2 Enter the ip address of the NVR via network browser. (Defau

31 7. PTZ 7.1 Click top-left corner of a camera to bring up parameter ofcamera info. 7.2 Click PTZ icon on top-right corner for on-screen di

32 8. Remote Monitoring and Playback 8.1 To live view remotely on NK700, enter its IP address on IE to connect. 8.2 Click on the channels locate

For More Information Please check VACRON Website http://www.vacron.com

CONTENTS Foreword 【Notices】 ...

1 Foreword 【Notices】 WARNING  Do not expose the DVR under the sunlight, heat or wet environment while installation. As it could decrease the p

2 Chapter 1【Specifications】 System CPU: TI SoC Operating system：Linux Storage Device/Interface Build in SATA interface x 4，compatible SATA/SATAII

3 speed, Play Frame by Frame mode (forward or backward) Pentaplex operation: Live/ Record/ Playback Event Notification Support e-mail / SMS / Mobil

4 Chapter 2 【Front and Rear Panel Illustration】 1. Front Panel A) USB slot B) Lockable removable hard drive tray. C) Power switch D) Ope

5 Chapter 3 【Hard Drive Installation】 Please install at least one hard drive before starting record video. 1. Power off the NVR 2. Insert the re